Waymark Garage

FL5 fender rock guards - first road set

The FL5 opened the front fenders and left the holes empty. Tyres throw stones through them onto the side panels. Most “flat” guards ignore the 3 mm step at the lower clip, so the clip has to take the extra thickness and the mesh never sits flush.

WGM-001 is the honeycomb set we now sell. Seven physical iterations: outer contour, lower clip offset, a cutout at the top groove, and 2 mm hex cells with 1.2 mm walls that still leave the vent working. PETG or ASA behind the wheel. PLA is a weekend test, not a road part.

Install needs Honda clip 91512-SX0-003. The factory clips in the fender liner snap if you try to reuse them. Two clips around the vent, two bolts behind the hole, and the undertray bolts for access.

If you run an FL5, this is the set to ask about. The other Type R piece on the bench is the MagSafe charger mount for the cabin.